Tesla Gen 2 High Power Wall Connector 80A product

Tesla Gen 2 Destination Charger Replacement | 80A Wall Connector for Hotels & Casinos

Name: Tesla Gen 2 Destination Charger Replacement | 80A Wall Connector for Hotels & Casinos
Brand: PRIMECOMTECH
SKU: tesla_gen2_8_5_destination_draft
Price: 1399.0 USD
Availability: InStock

by PRIMECOMTECH

$1,399.00 - $1,499.00

$1,399.00

$1,399.00 - $1,499.00

$1,399.00

Quantity

Tesla Gen 2 • Destination EV Charger Replacement

Tesla Gen 2 Destination Charger Replacement — In Stock

Looking for a replacement Tesla Destination Charger? We stock new Gen 2 80A High Power Wall Connectors (HPWC) with 8.5-ft and 24-ft cable options for compatible existing installations at hotels, resorts, casinos and parking facilities.

If an existing Gen 2 unit fails, a compatible replacement may let your electrician reuse the current charging location, electrical circuit and wired power-sharing setup without converting the entire site to a different charger generation.

Questions? (408) 598-3300

In stock and ready for fulfillment from California. Select 8.5 ft or 24 ft in the product selector above. Shipping timing depends on order cutoff and delivery location; no photo required.

Tesla Gen 2 Wall Connectors serving a hotel parking area — Tesla Gen 2 Destination Charging at a hotel

Tesla Gen 2 HPWCFor compatible existing Gen 2 installations

Two cable lengths8.5 feet or 24 feet

Same-site replacementExisting infrastructure may be reusable after inspection

Simple replacement process

Match the Gen 2 unit. Choose the cable. Restore charging.

1

Confirm Gen 2

Check that the failed charger is a compatible Tesla Gen 2 Wall Connector. Not sure? We can help.

2

Order the replacement

Select the 8.5-foot or 24-foot cable above and place your order normally.

3

Install & test

A qualified electrician confirms the match, reconnects the unit and restores any existing settings or power sharing.

Recognize these installations?

Tesla Gen 2 Wall Connectors installed at hotels, parking garages and other destination locations.

Tesla destination charger installed as destination charger — Existing destination setup

Multiple Tesla Wall Connectors wired together — Wired together

Tesla destination charger installed on wall — Property wall install

Row of Tesla Gen 2 charging units in an indoor parking facility — Hotel garage

Tesla charging stations in hotel guest-reserved parking spaces — Hotel guest charging

Multiple Tesla Gen 2 Wall Connectors in dedicated parking bays — Multi-charger location

Tesla vehicles parked near destination charging stations in hotel parking spaces — Hotel parking

Installation examples; these properties are not presented as Primecom.Tech customers or partners.

Tesla Gen 2 Wall Connector specifications

What you need to know before replacing a Gen 2

Gen 2's adjustable current setting and wired power-sharing support are useful for sites that already have dedicated charging circuits or groups of Wall Connectors.

Up to 80AMaximum output on a suitable 100A circuit

AdjustableInstaller can set a lower current for a suitable smaller circuit

Up to 4Compatible Gen 2 units in a wired power-sharing group

277VSingle-phase rating marked on our current inventory packaging

Can I keep my existing wiring and breaker?

Sometimes. A like-for-like Gen 2 replacement may allow existing infrastructure to remain, but the electrician must confirm the replacement model/revision, voltage rating, breaker and conductor size, grounding, mounting and code compliance. An identical-looking housing does not guarantee a no-changes installation.

Can I use a smaller circuit or reduce charging amperage?

Yes. Tesla Gen 2 Wall Connectors have installer-configurable current settings for suitable smaller branch circuits. For example, Tesla lists 40A output on a 50A circuit breaker and 32A output on a 40A breaker, versus 80A on a 100A breaker. This must be configured by a qualified installer to match the site; lowering the charger setting does not fix inadequate or unsafe wiring. Tesla Gen 2 specifications.

What if several Gen 2 chargers share power?

Gen 2 supports wired group power management for up to four compatible Wall Connectors (one leader and up to three followers). A replacement in an existing group must have its communication wiring and settings verified and reconfigured as needed by the electrician.

What about 277V commercial service?

Our current Gen 2 inventory packaging states 277V single-phase. A qualified electrician must verify the actual unit nameplate and proper phase-to-neutral supply before installation. Never connect the charger to 480V line-to-line.

Will every Tesla charge at 80A? What about the Destination Charging listing?

No. Vehicle onboard charging limits may be lower than 80A. Also, replacing a charger does not automatically guarantee continued Tesla Destination Charging map listing or commercial program participation; Tesla controls those requirements separately.

Gen 2 vs Gen 3

For legacy Destination Charging sites, Gen 2 is usually the right replacement target

Properties with older Tesla Destination Charging installations are usually trying to replace a failed Gen 2 Wall Connector—not substitute a newer lower-cost Gen 3 unit intended more for recent home-use positioning.

Our current Gen 2 inventory packaging is marked 277V single-phase, and Gen 2 supports wired power sharing among up to four compatible units. That combination is especially relevant for many commercial replacement projects.

The electrician must still verify the actual unit nameplate, wiring and branch-circuit design before installation.

Tesla Wall Connector Gen 2 vs Gen 3 comparison

Why fast replacement matters

A broken destination charger is a guest-experience problem

When a hotel or property advertises Tesla charging but the unit is out of order, guests may need to leave the site to charge elsewhere. Keeping compatible replacement hardware available helps restore the amenity faster.

This section supports hospitality replacement intent and helps bridge to the broader commercial page for hotels, casinos and resorts.

Order your replacement Tesla Gen 2

Choose your cable length and order above. For multiple units or help identifying a compatible replacement, contact our commercial team. Photos are optional.

Multi-Unit Quote

Call (408) 598-3300 or email info@primecom.tech if you want help checking an existing unit.

Not replacing an existing Destination Charger? For broader Gen 2 specifications and general installations, see our standard Tesla Gen 2 Wall Connector page.